I've been the proud owner of an '82 320i & an '85 Euro 323i.
I recently replaced the ECU which was the final item I needed to get my '85 635CSI running after 6 years. (Don't ask - long story - now ex-wife etc., :eyecrazy )
On top of that I've replaced the disti cap, rotor, plugs, & wires.
I had been cranking the engine over to keep it from being completely still every month.
My issue is when the car is at full running temp (keep in mind I live in Dallas TX) the car bogs down and hesitates upon strong acceleration above 2,500 revs.
I'm about to replace the fuel filter to see if this will help as I've gone through about 10 tanks of fuel since I got it running.
I certainly would like any additional advise please.
Cheers.
I recently replaced the ECU which was the final item I needed to get my '85 635CSI running after 6 years. (Don't ask - long story - now ex-wife etc., :eyecrazy )
On top of that I've replaced the disti cap, rotor, plugs, & wires.
I had been cranking the engine over to keep it from being completely still every month.
My issue is when the car is at full running temp (keep in mind I live in Dallas TX) the car bogs down and hesitates upon strong acceleration above 2,500 revs.
I'm about to replace the fuel filter to see if this will help as I've gone through about 10 tanks of fuel since I got it running.
I certainly would like any additional advise please.
Cheers.
85 635CSI hesitation on acceleration??
0 commentaires:
Enregistrer un commentaire