I finally got a chance to spend a few hours on my project 320i last night. Car has never ran since I have owned her as I slowly worked my way through the fuel system.
New:
So, last night I tried to start her up. I verified strong flow to the fuel distributor by removing the main fuel line, placing it in a plastic 44oz cup, and jumpered the fuel pump relay. Strong fuel flow. Replaced all and tried to fire her up.
This is the best I get:
She fires and runs for 1 second or so, then dies. Is this just it running off the cold start injector?
Next steps you guys would recommend?
New:
- fuel distributor
- fuel injectors
- both fuel pumps
- fuel filter
- both tanks boiled out and sealed
- all ignition parts replaced
- most vacuum lines replaced
- breather hoses replaced
So, last night I tried to start her up. I verified strong flow to the fuel distributor by removing the main fuel line, placing it in a plastic 44oz cup, and jumpered the fuel pump relay. Strong fuel flow. Replaced all and tried to fire her up.
This is the best I get:
She fires and runs for 1 second or so, then dies. Is this just it running off the cold start injector?
Next steps you guys would recommend?
Possible to run a few seconds just on the cold start injector?
0 commentaires:
Enregistrer un commentaire