After installing the M5 front bumper and the belly pan I'm scraping everywhere, mainly due to the H&R lowering springs. Didn't really have much problems before, the OE bumper and pan wasn't as low as this M5 stuff.
Since I have to take the front suspension apart and I already replaced the rear M5 sway bar with an Eibach 18mm bar I bought the front Eibach 28mm bar.
2 hours later....subframe is dropped
Then the M5 bar comes out
It's only 1mm thicker, but worth it.
Eibach is installed
Just need to bolt the subframe up, get that heavy steering box (no I'm not putting in the M5 box gg) connected, and then drop the wheel carriers so I can raise the front up 1/2". More on how I'm doing that later.
Hope to finish everything tonight.
Since I have to take the front suspension apart and I already replaced the rear M5 sway bar with an Eibach 18mm bar I bought the front Eibach 28mm bar.
2 hours later....subframe is dropped
Then the M5 bar comes out
It's only 1mm thicker, but worth it.
Eibach is installed
Just need to bolt the subframe up, get that heavy steering box (no I'm not putting in the M5 box gg) connected, and then drop the wheel carriers so I can raise the front up 1/2". More on how I'm doing that later.
Hope to finish everything tonight.
Time to raise the front end up
0 commentaires:
Enregistrer un commentaire